- Alloy Cast Steel Base Adamite Rolls & Rings
- Graphitic / Graphitized Rolls & Rings
- S.G. (Nodular) Cast Iron Rolls
- Chilled Cast Iron Rolls
- Forged Steel Rolls, Shafts & Rings
- Steel Rolling Mill Equipments
- Steel & Iron Castings
Our Products
Contact Us Now
Indian Iron & Steel Industries
184/2, Sec-19/B, Jassran Road,
Vishwakarma Nagar,
Mandi Gobindgarh - 147 301,
Punjab, (India)
Alloy Cast Steel Base Adamite Rolls & Rings
Alloy Cast Steel Base Adamite Rolls are hypereutectoid steel of Pearlitic Microstructure (Pearlite + Carbides) which are produced from alloyed (Mn, Cr, Ni & Mo). These Rolls are subjected to sophisticated multi-stage high temperature Heat- Treatment by Double Annealing followed by tempering cycle to the best microstructure which is capable of a higher mechanical strength with thermal and wear resistance along with hardness in depth (Constant Hardness Curve).
| Chemical Composition (Range) | Physical Properties | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C% | Mn% | Si% | Cr% | Ni% | Mo% | V% | S% | P% | Hardness Range (Shore 0C) |
Tensile Strength (N/mm2) |
Bending Resistance N/mm2) |
|||
| 0.60 2.00 |
0.50 1.20 |
0.20 0.80 |
1.00 2.00 |
0.50 2.00 |
0.20 0.80 |
0.10 0.60 |
0.040 Max | 0.045 Max | 300C - 600C | 350 – 700 | 600 – 1100 | |||
Product Application
Application of Alloy Cast Steel Base Adamite is very suitable according to Hardness & Chemical Composition range as per below:
| Rolling Mills | Mill - Type | Stands - Position | Pass - Condition | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heavy, Medium & Light Section, Beams, Rail & Bar Mills | 2 & 3 Hi or Universal | In all stands (Rough, Intermediate & Finish) | In case deep or light groove pass, low reduction & low RPM. | |||||||||
| Medium & Narrow Strip TMT & Wire Rod Mills | 2 & 3 Hi | Only on Roughing Stand | ||||||||||
| Heavy, Medium & Light Section Mills | Can be used for Straightening Rollers (Reels) | |||||||||||